In the underground coal mines, the drilling efficiency is the lifeline of tunneling. When traditional Drilling Rigs encounter hard rock, they often experience slow advance, rapid wear of the drill bit, and the need to repeatedly dismantle the wiring during machine relocation, which takes a long time. The real pain point for customers is insufficient power of the equipment, cumbersome relocation, and frequent maintenance, resulting in repeated delays in the project schedule.
The Anneng tracked hydraulic Drilling Rig uses a fully hydraulic drive and tracked chassis as its core to solve these problems from the source. The walking and drilling share the hydraulic system, and relocation does not require dismantling the wiring. It can be operated by a single person. The drill arm can be adjusted at multiple angles, and the top plate, side eye, and bottom hole can be quickly located, making it suitable for narrow tunnel operations. In actual tests, in medium-hard rock layers, the drilling speed is 20%-30% faster than traditional equipment, the drill bit life is extended, the continuous operation is stable, and the maintenance interval is significantly prolonged.
This equipment is not a single-function machine. Through a quick-change device, a submersible impactor can be added to achieve the function of Down-the-hole Drilling Rig; for extremely hard gangue, an Ultra-high Pressure Rock Splitter can be selected to crack before drilling, significantly reducing the wear of the drill bit. Anneng also provides an Excavator Converted Drilling Rig solution, which makes it convenient for customers to convert their existing excavators into drilling rigs, maximizing the utilization of equipment assets. The versatility of this one machine saves procurement costs and reduces storage pressure.
The equipment has been verified in actual working conditions in multiple coal mines in China. It has strong climbing ability, a stable center of gravity, simple operation, and low technical requirements for operators. It is widely used in tunneling, gas extraction holes, water exploration holes, etc., and is a practical choice for improving mining productivity.
Product features:
Tracked walking + fully hydraulic drilling, powerful and fast relocation, excellent adaptability underground.
Structural reinforcement design, low failure rate, time-saving and labor-saving maintenance.
Tips:
When drilling hard rock, prioritize adjusting the impact frequency to avoid blindly increasing the advancing pressure.
Before relocation, check the tension of the tracks and the hydraulic oil temperature to reduce unnecessary work.
For extremely hard rock layers, it is recommended to use Mining Rock Splitters for pre-cracking before normal drilling, which saves drill bits and speeds up the process.