Jiangsu Aneng Drilling Equipment Technology Co., Ltd.
Hard rock excavation efficiency is low?
Hard rock excavation efficiency is low? In mining and tunnel construction, traditional Drilling Rigs often lack power, and the drilling is slow and the drill is frequently stuck when working in hard rock. Although Excavator Converted Drilling Rigs have certain flexibility, they have poor stability and low hole-making accuracy. Relying on Ultra-high pressure Rock Splitters or Mining Rock Splitters for auxiliary crushing not only complicates the process, but also greatly increases the cost. A...
Hard rock mining is inefficient?
Hard rock mining is inefficient? In traditional hard rock mining, Drilling Rigs are slow to drill and noisy, Excavator Converted Drilling Rigs have poor mobility, and ordinary Ultra-high pressure Rock Splitters are not only bulky, but also difficult to use in narrow mine tunnels. The high cost of Mining Rock Splitters also makes small and medium-sized projects discouraged. The person in charge of the mine construction team said helplessly: "Drilling and blasting take a long time, and the...
Is drilling and rock breaking expensive?
Is drilling and rock breaking expensive? In mining and tunnel construction, traditional Drilling Rigs are bulky and difficult to transfer, and the cost of purchasing them separately is high; when encountering hard rock formations, they are inefficient and easy to wear the drill bit. Conventional rock breaking methods are not only time-consuming, but also increase construction costs. Many engineering teams complain: "Buying a drilling rig is too expensive, renting equipment is not...
The drill gets stuck and causes delays? The Aneng submersible drilling rig can solve the problems!
In mining excavation and infrastructure drilling scenarios, the drilling equipment faces prominent operational challenges: ordinary Drilling Rigs are prone to getting stuck and dropping the drill bit, and have frequent failures during deep drilling; some Hydraulic Mining Drilling Rigs lack power in remote areas and are difficult to move; during small-scale operations, large equipment lacks flexibility. This has greatly troubled the construction teams - downtime due to faults delays the...
The construction companies for mines and infrastructure projects all have a common problem: The ordinary drilling rigs seem to be working, but in reality, they are all causing hidden waste - hard rock drilling gets stuck and causes delays, fuel and materials are wasted; the heavy equipment takes a long time to move, and workers are often left idle; what's worse, they cannot be connected with the drilling and splitting machines, and the drilling process is completed only to be followed by...
Those who have worked in mine excavation know that when it comes to drilling blast holes, if the equipment is not up to par, it will not only cause delays but also consume a lot of money. Some air compressors are extremely heavy and it takes a long time to move them; others are lightweight but lack power, and the drilling machine gradually loses its efficiency as the operation continues. Not to mention that an additional machine is needed to burn oil and supply power, and the cost of oil...
When will this crazy slope be tamed?
Lao Zhou had worked in a mining site in Yunnan for twelve years. The 65° rocky slope was the most troublesome for him: "Carrying the drilling machine up the slope is even more dangerous than rock climbing. Eight out of ten times, the drill gets stuck and has to be retracted." Now, the new WGQK-180D drilling machine produced by AN NENG has neatly solved this difficult problem. This machine has three powerful tricks: The hydraulic feet can self-level: No matter how steep the slope, the four...
Directly addressing industry pain points: Ordinary drilling splitting equipment has a slow rock-breaking speed and low efficiency for hard rock operations; it has poor compatibility with Down-The-Hole Drilling Rig and other drilling equipment for excavation, and the connection process is cumbersome; the machine body is heavy and inconvenient to move, and the construction flexibility is insufficient. These problems lead to project delays, increased labor costs, and seriously affect project...
The mining rock splitter from ANNENG is designed to tackle the problems of slow rock splitting in mines and the difficulty of underground operations. When the rock splitting equipment in the mine is inefficient, it can't extract much ore in a day. If the operation is carried out underground, the equipment might be too large to fit or not as flexible as the Underground Rock Splitting Machine, which would require changing the equipment and causing delays in the project schedule. ANNENG's Mining...
Is PV drilling difficult to coordinate? The ANNENG YT593 drill rig is highly adaptable!
During the construction of photovoltaic power stations, many teams often encounter problems with drilling operations: either the drilling rig is difficult to move, making it slow to transfer across the open photovoltaic sites and delaying the overall project schedule; or the drilling depth and precision do not meet the requirements, affecting the installation quality of the photovoltaic supports; or it is difficult to coordinate with other equipment and incompatible with Excavator Converted...
How to solve the problem of insufficient power of the hydraulic air compressor
In mining, infrastructure construction and other operation scenarios, many people are troubled by the problems of hydraulic air compressors: either the power is insufficient, causing the Ultra-high pressure Rock Splitters and Excavator Converted Drilling Rigs to malfunction and delaying the construction progress; or the adaptability is poor, making it impossible to flexibly combine with Drilling And Splitting Machines and other equipment. Changing the working conditions requires replacing the...
The common problem of resource waste in granite mining areas is being rewritten: In a certain mine, due to the inability to separate the rock layers containing crystal veins, the entire operation area was shut down for three months. The 300 megapascal intelligent hydraulic system injected by ANNENG's ultra-high pressure rock splitting machine successfully achieved the non-destructive separation of the mineral veins, and the mining yield rate exceeded 97%. Technical Foundation Equipped with...
A Great Helper for Tunnel Construction: The Practical Application of WGTL-45 Drilling Machine
Those engaged in tunnel projects know that changes in rock layers often cause headaches. Traditional methods either have slow progress or high risks. When our WGTL-45 system was used in construction in Malaysia, it not only completed the project two months ahead of schedule but also saved 30% of the budget. The site supervisor said that what made them most at ease was that there were no any safety accidents throughout the process. Device Highlights The hydraulic system can automatically...
Still troubled by the cumbersome air compressor? This hydraulic one can be carried around!
Who hasn't suffered from the air compressor on the construction site? It's hard to move, consumes a lot of power, and the electricity bill is painful to look at. Our 3.0 hydraulic air compressor is different - it works with the hydraulic system, and after being tested on a construction site in Fujian for half a year, it saved one-third of the electricity bill. It runs around the site on two wheels, even more obedient than a suitcase. Four main advantages: 1.Hydraulic drive is 30% more...
Mining Splitter: An Efficient and Safe Solution for Rock Splitting
Traditional blasting operations are complex and come with significant safety risks. Manual crushing is inefficient and costly. Our Hydrasplit Stone Splitter employs static pressure splitting technology. After providing a solution for a certain metal mine in the Philippines, the daily mining efficiency increased by three times and zero safety accidents were recorded. The project owner stated that the overall cost was reduced by more than 40%. Core product advantages Using an ultra-high...
In the traditional engineering field, there is a common contradiction between the single functionality of equipment and the demands for cross-operation. Conventional cranes often show limitations in adaptability when dealing with complex working conditions. The WGQK-180D series adopts modular transformation technology to deeply integrate the lifting function with the Excavator Converted Drilling Rig system, achieving an upgraded multi-purpose equipment solution. The actual application data...
ANNENG Mining Rock Splitter: Your Tough Job Solution
Ever wished breaking rock was safer and smarter? Our Mining Rock Splitter does exactly that. No explosives, no flying chunks—just hydraulic power that cracks even the hardest stone. This Hydraulic Stone Splitter isn't one-size-fits-all. You control the force, so it handles delicate work just as well as heavy mining. It's quiet, low-vibration, and surprisingly nimble—even in tight underground spots. Key Specs Working Pressure: 60-80 MPa Splitting Force: 300-500 tons Weight: 80-150 kg See...
ANNENG Airborne Hydraulic Rock Splitter: Tough, High-Pressure Tools That Make Breaking Rock Easy
What is this tool, exactly? The ANNENG Airborne Splitter is a top-shelf Ultra-High Pressure Rock Splitter. It totally changes how we break rock across different jobs. Unlike old-school explosives or clunky machines, this hydraulic tool splits rock cleanly and exactly where you want it. It’s perfect for jobs where safety, getting it right, and following environmental rules really matter. This is a high-quality Hydraulic Rock Splitting Tool. It works simply but hits hard: super-high pressure...
WG-90 Excavation and Hydraulic Drilling Rig: Making Construction Work Easier
What is the WG-90? The WG-90 is a top-of-the-line excavator that also works as a drilling rig. ANNENG built it to do both jobs well—no more switching between separate machines. Instead of just adding a drill to an excavator, we integrated the drilling parts right into the original hydraulic system. This means it digs and drills smoothly, saving you time and space on the job site. Contractors around the world use it because it works well in all kinds of conditions. Product Images Want to see...
ANNENG YT360 Down-The-Hole Drilling Rig
Our YT360 is a top-of-the-line Hydraulic Dth Drilling Rig. It’s made for tough blasting jobs in mines, quarries, and big excavation projects. It handles hard rock well. And it keeps working efficiently—with little downtime. This is professional Drilling Equipment For Excavation. It has a strong hydraulic system and a tough frame. Great for teams that need reliable performance, day in and day out. Whether you’re drilling blast holes for ore or prepping a site, the YT360 gets the job done...
ANNENG YQ55 Hydraulic Air Compressor – Power Where You Need It, No Electricity Required
What is this compressor? Ever been on a remote worksite with no power but needed compressed air for tools? The ANNENG YQ55 Hydraulic Air Compressor fixes that. It runs off your excavator or heavy machinery's hydraulic system – no generator or electrical hookup needed. It's built tough for mining, construction, and fieldwork. Pair it with our Hydraulic Rock Splitter For Mining to clear dust from drill holes. Or use it with pneumatic tools for onsite repairs. It's the reliable air source you...
WG-90M Excavation-to-Anchor Drilling Rig
Product Overview The WG-90M is a flexible, high-performance excavator converted drilling rig. It works for modern construction, mining, and renewable energy projects. This rig turns standard excavators into powerful drilling machines. That means more flexibility and lower costs for your jobs. As a top drilling rig from excavator, it uses the excavator’s mobility and stability. It works well even in tough terrain – great for anchoring, slope stabilization, or solar bracket installation....
ANNENG Down-The-Hole Drilling Rig: Heavy-Duty Hydraulic Drilling Equipment
What This Rig Is All About Our Down-The-Hole (DTH) Drilling Rig is a tough, hydraulic-powered machine built to handle tough drilling jobs. As a core product at ANNENG, this Down The Hole Drilling Machine combines strong hydraulics, durable parts, and easy operation—perfect for mining, construction, and big infrastructure projects worldwide. Unlike regular drilling gear, our Hydraulic Dth Drilling Rig focuses on getting the job done efficiently, without breaking down, and keeping costs low. ...
ANNENG WGQK-180D – One Rig for Digging and Drilling, Perfect for Slopes and Mines
What is this rig, exactly? Tired of switching between excavators and drills all day? The ANNENG WGQK-180D fixes that. It’s a crane-modified slope drill that turns your regular excavator into a two-in-one workhorse. It’s built for tough jobs: stabilizing slopes, prepping mine sites, digging foundations. It’s strong enough to excavate and precise enough to drill – and it plays nice with our Hydraulic Rock Splitter For Mining and Ultra-High Pressure Rock Splitter. Together, they make a complete...
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.